升降平台|升降台|苏州金鄂物流机械有限公司生产升降平台、升降台

DCQY移动式液压登车桥
DCQY MOBILE YARO RAMPS
移动式液压登车桥是用于货物装卸位置不固定场合的集装箱货车货物装卸的辅助设备，可方便地移动它实现货物的快速装卸。
The mobile ramps,a kind of special auxiliaries for goods loading & unloading,is unloading location being variable.It can realize speed loading & unloading of cargoes.


	采用手摇液压泵作动力，无须外接动力电源，即可轻松实现登车桥高度的调节。 The height adjustment for the yardramp become very easy with using of the hand hydraulic pump as dynamic and the exteral electric supply is unnecessary.

可调节的挂链钩可方便地与各种货车紧密配合。
The adjustable chain coupling can easily coperate with all kinds of lorries.

附设刹车垫防止货物装卸时登车桥移位。
The attached brake pad can protect the year ramp from shift while loading & unloading.

型号Model	载荷（kg）Ability	A m	B m	C m	D m	E m	F m	H m	I m
DCQY6-0.8	6000	7.00	2.20	1.00	0.30	2.00	2.08	1.00	1.80
DCQY10-0.8	10000	7.50	2.40	1.00	0.30	2.00	2.08	1.00	1.80

DCQ 固定式液压登车桥（电动液压月台卸货平台）
DCQ HYDRAULIC DOCK LEVELER
固定式液压登车桥是实现货物快速装卸的专用物流机械。它可使叉车等搬运车直接进入货车装卸货物，能成倍提高工效又能充分保障作业安全。
The hydraulic dock leverler is a kind of special mechanisn which makes speed loading & unloading a reality. The transportation can direcrly go into the lorry to load & unload by means of the hydraulic dock leveler,thus greatly enhancing the operating efficiency as well as fully ensure the safty of work.

特点：
● 全意大利电动液压系统，24V直流单个按钮操纵控制。
● 两侧安全防护裙板保护脚部安全。
● 唇板与车厢始终紧密吻合。
● 平台与唇板采用长轴铰接，充分保证其高强度、长寿命。
(附设检修安全撑竿及缓冲垫。)
● 中国平安保险公司承担产品质量责任险。

Features:
● Italian all-hydraulic power system,single 24V press-button operation control.
● With safty protecting skirboard on both sides to shield the foot.
● The lip & the wagon box are always closely fitted.
● The platform & the lip are hinged by long axle to assure the high strench & long life.
● Liability Insurance Manganese of Product Quality PAIC.

2根30mm直径预埋管，至设想安装控制钮及连接动力电源处。
Two pleces ofbuilt-in tubes with diameter of 30mm stretck to the assumed installing control button the position of connecting power supply.

车辆撞击缓冲垫，用铁膨胀螺栓固定。
Bumper anchorites by iron expansio bolt.

注意事项：
●预设管可以从任何位置引入地坑。
●安装缓冲垫用铁膨胀螺栓固定即可。
●缓冲垫安装位置应注意高度及宽度尺寸的合理，以确保缓冲垫与车辆有良好接触部位。

Attention:
●he built-in tube can introduced into the pit from any position .
●Bumper can be anchored by iron expansion bolt.
●The installing position of the bumper should be reasonable with proper size of the height&contacting loction the between the bumper&the car.

型号Model	额定载荷(k g)Ability	平台尺寸(m m)Platform size	唇板尺寸(m m)Lip Length 最高 Above	倾幅范围Safe Working Range	倾幅范围Safe Working Range 最低 below	地坑尺寸（mm）Pit DimensionsL×W×H
DCQ6-0.55	6000	2000×1800	400	300	250	2080×1840×600
DCQ6-0.55	6000	2000×2000	400	300	250	2080×2040×600
DCQ6-0.7	6000	2500×2000	400	400	300	2580×2040×600
DCQ10-0.55	10000	2000×1800	400	300	250	2080×1840×600
DCQ10-0.55	10000	2000×2000	400	300	250	2080×2040×600
DCQ10-0.7	10000	2500×2000	400	400	300	2580×2040×600